dmesg - AMD A8-7410 APU
Linux version 5.15.0-58-generic (buildd@lcy02-amd64-101) (gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #64-Ubuntu SMP Thu Jan 5 11:43:13 UTC 2023 (Ubuntu 5.15.0-58.64-generic 5.15.74)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
signal: max sigframe size: 1776
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009bab8fff] usable
BIOS-e820: [mem 0x000000009bab9000-0x000000009bb55fff] reserved
BIOS-e820: [mem 0x000000009bb56000-0x000000009c064fff] usable
BIOS-e820: [mem 0x000000009c065000-0x000000009d43afff] ACPI NVS
BIOS-e820: [mem 0x000000009d43b000-0x000000009e611fff] reserved
BIOS-e820: [mem 0x000000009e612000-0x000000009e612fff] usable
BIOS-e820: [mem 0x000000009e613000-0x000000009e61afff] ACPI NVS
BIOS-e820: [mem 0x000000009e61b000-0x000000009e773fff] usable
BIOS-e820: [mem 0x000000009e774000-0x000000009ed2bfff] reserved
BIOS-e820: [mem 0x000000009ed2c000-0x000000009ed88fff] usable
BIOS-e820: [mem 0x000000009ed89000-0x000000009f3e9fff] reserved
BIOS-e820: [mem 0x000000009f3ea000-0x000000009f3fffff] usable
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb00fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: ASUSTeK COMPUTER INC. X540YA/X540YA, BIOS X540YA.300 07/01/2016
tsc: Fast TSC calibration using PIT
tsc: Detected 2195.829 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x13f000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
last_pfn = 0x9f400 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd900-0x000fd90f]
Using GB pages for direct mapping
RAMDISK: [mem 0x29c4b000-0x30e1cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0580 000024 (v02 _ASUS_)
ACPI: XSDT 0x000000009C0E9090 000094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FACP 0x000000009C0F6538 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20210730/tbfadt-615)
ACPI: DSDT 0x000000009C0E91B8 00D37A (v02 _ASUS_ Notebook 00000000 INTL 20091112)
ACPI: FACS 0x000000009D427F80 000040
ACPI: APIC 0x000000009C0F6648 00007E (v03 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FPDT 0x000000009C0F66C8 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FIDT 0x000000009C0F6710 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: ECDT 0x000000009C0F67B0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: MCFG 0x000000009C0F6878 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
ACPI: HPET 0x000000009C0F68B8 000038 (v01 _ASUS_ Notebook 01072009 AMI 00000005)
ACPI: WDRT 0x000000009C0F68F0 000047 (v01 _ASUS_ Notebook 01072009 AMI 00000005)
ACPI: SSDT 0x000000009C0F6938 000CB4 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 0x000000009C0F75F0 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: TPM2 0x000000009C0FBE98 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: SSDT 0x000000009C0FBED0 001207 (v01 AMD CPMCMN 00000001 INTL 20091112)
ACPI: SSDT 0x000000009C0FD0D8 0015ED (v01 AMD CPMDFIGP 00000001 INTL 20091112)
ACPI: SSDT 0x000000009C0FE6C8 000FD6 (v01 AMD CPMZPODD 00000001 INTL 20091112)
ACPI: Reserving FACP table memory at [mem 0x9c0f6538-0x9c0f6643]
ACPI: Reserving DSDT table memory at [mem 0x9c0e91b8-0x9c0f6531]
ACPI: Reserving FACS table memory at [mem 0x9d427f80-0x9d427fbf]
ACPI: Reserving APIC table memory at [mem 0x9c0f6648-0x9c0f66c5]
ACPI: Reserving FPDT table memory at [mem 0x9c0f66c8-0x9c0f670b]
ACPI: Reserving FIDT table memory at [mem 0x9c0f6710-0x9c0f67ab]
ACPI: Reserving ECDT table memory at [mem 0x9c0f67b0-0x9c0f6870]
ACPI: Reserving MCFG table memory at [mem 0x9c0f6878-0x9c0f68b3]
ACPI: Reserving HPET table memory at [mem 0x9c0f68b8-0x9c0f68ef]
ACPI: Reserving WDRT table memory at [mem 0x9c0f68f0-0x9c0f6936]
ACPI: Reserving SSDT table memory at [mem 0x9c0f6938-0x9c0f75eb]
ACPI: Reserving SSDT table memory at [mem 0x9c0f75f0-0x9c0fbe95]
ACPI: Reserving TPM2 table memory at [mem 0x9c0fbe98-0x9c0fbecb]
ACPI: Reserving SSDT table memory at [mem 0x9c0fbed0-0x9c0fd0d6]
ACPI: Reserving SSDT table memory at [mem 0x9c0fd0d8-0x9c0fe6c4]
ACPI: Reserving SSDT table memory at [mem 0x9c0fe6c8-0x9c0ff69d]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013effffff]
NODE_DATA(0) allocated [mem 0x13efd4000-0x13effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000013effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000009bab8fff]
node 0: [mem 0x000000009bb56000-0x000000009c064fff]
node 0: [mem 0x000000009e612000-0x000000009e612fff]
node 0: [mem 0x000000009e61b000-0x000000009e773fff]
node 0: [mem 0x000000009ed2c000-0x000000009ed88fff]
node 0: [mem 0x000000009f3ea000-0x000000009f3fffff]
node 0: [mem 0x0000000100000000-0x000000013effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 98 pages in unavailable ranges
On node 0, zone DMA32: 157 pages in unavailable ranges
On node 0, zone DMA32: 9645 pages in unavailable ranges
On node 0, zone DMA32: 8 pages in unavailable ranges
On node 0, zone DMA32: 1464 pages in unavailable ranges
On node 0, zone DMA32: 1633 pages in unavailable ranges
On node 0, zone Normal: 3072 pages in unavailable ranges
On node 0, zone Normal: 4096 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x9bab9000-0x9bb55fff]
PM: hibernation: Registered nosave memory: [mem 0x9c065000-0x9d43afff]
PM: hibernation: Registered nosave memory: [mem 0x9d43b000-0x9e611fff]
PM: hibernation: Registered nosave memory: [mem 0x9e613000-0x9e61afff]
PM: hibernation: Registered nosave memory: [mem 0x9e774000-0x9ed2bfff]
PM: hibernation: Registered nosave memory: [mem 0x9ed89000-0x9f3e9fff]
PM: hibernation: Registered nosave memory: [mem 0x9f400000-0xfeafffff]
PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfeb00fff]
PM: hibernation: Registered nosave memory: [mem 0xfeb01000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x9f400000-0xfeafffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u524288
pcpu-alloc: s208896 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 883150
Policy zone: Normal
Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-58-generic", will be passed to user space.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 3295772K/3589320K available (16393K kernel code, 4378K rwdata, 10812K rodata, 3232K init, 6568K bss, 293288K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 50532 entries in 198 pages
ftrace: allocated 198 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16
random: crng init done
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20210730
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa6ce97b07, max_idle_ns: 440795228989 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.65 BogoMIPS (lpj=8783316)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
RETBleed: Mitigation: untrained return thunk
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD A8-7410 APU with AMD Radeon R5 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (17566.63 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x9c065000-0x9d43afff] (20799488 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0x9e613000-0x9e61afff] (32768 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 01:19:18, date: 2024-08-14
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1723598358.168:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
Kprobes globally optimized
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: Boot ECDT EC used to handle transactions
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 5 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
pci 0000:00:01.0: [1002:9851] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:00:01.0: enabling Extended Tags
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfea64000-0xfea67fff 64bit]
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
pci 0000:00:02.2: enabling Extended Tags
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: enabling Extended Tags
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xd0900000-0xd091ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xfe700000-0xfe7fffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xfea70000-0xfea70fff]
pci 0000:00:08.0: reg 0x24: [mem 0xfea6a000-0xfea6bfff]
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfea68000-0xfea69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfea6f000-0xfea6f3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xfea6e000-0xfea6e0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.0: reg 0x10: [mem 0xfea6d000-0xfea6d0ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xfea6c000-0xfea6c0ff 64bit]
pci 0000:00:14.7: PME# supported from D3cold
pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
pci 0000:01:00.0: [168c:0036] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xfe900000-0xfe97ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xfe980000-0xfe98ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfe800000-0xfe800fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
pci 0000:00:02.3: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
ACPI: PCI: Interrupt link LNKA configured for IRQ 4
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKC configured for IRQ 11
ACPI: PCI: Interrupt link LNKD configured for IRQ 10
ACPI: PCI: Interrupt link LNKE configured for IRQ 11
ACPI: PCI: Interrupt link LNKF configured for IRQ 10
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x3
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC initialization complete
ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9bab9000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9c065000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e613000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e774000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9ed89000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f400000-0x9fffffff]
e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c51] has been reserved
system 00:07: [io 0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x0800-0x089f] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [io 0x0910-0x091f] has been reserved
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:07: [mem 0xfeb00000-0xfeb00fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
pci 0000:00:02.3: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: resource 8 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x160 took 18157 usecs
pci 0000:00:12.0: PME# does not work under D3, disabling it
pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x160 took 19519 usecs
pci 0000:00:13.0: PME# does not work under D3, disabling it
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0000000097ab9000-0x000000009bab9000] (64MB)
LVT offset 0 assigned for vector 0x400
Trying to unpack rootfs image as initramfs...
perf: AMD IBS detected (0x000000ff)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.34)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:02.2: can't derive routing for PCI INT B
pcieport 0000:00:02.2: PCI INT B: not connected
pcieport 0000:00:02.2: PME: Signaling with IRQ 24
pcieport 0000:00:02.3: can't derive routing for PCI INT C
pcieport 0000:00:02.3: PCI INT C: not connected
pcieport 0000:00:02.3: PME: Signaling with IRQ 25
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC: AC Adapter [AC0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: button: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: button: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: button: Power Button [PWRF]
ACPI: \_PR_.P000: Found 2 idle states
ACPI: \_PR_.P001: Found 2 idle states
ACPI: \_PR_.P002: Found 2 idle states
ACPI: \_PR_.P003: Found 2 idle states
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [THRM] (58 C)
Linux agpgart interface v0.103
tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0x9d433000-0x9d433fff flags 0x200] vs 9d433000 4000
fbcon: Taking over console
tpm_crb MSFT0101:00: can't request region for resource [mem 0x9d433000-0x9d433fff]
tpm_crb: probe of MSFT0101:00 failed with error -16
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xfea6e000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.0-58-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:13.0: EHCI Host Controller
ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: debug port 2
ehci-pci 0000:00:13.0: irq 18, io mem 0xfea6d000
ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.0-58-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
ACPI: battery: Slot [BAT0] (battery present)
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: setting system clock to 2024-08-14T01:19:19 UTC (1723598359)
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
vesafb: mode is 1366x768x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0x000000001a1eded9, using 4224k, total 4224k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-1.1: new full-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=13d3, idProduct=3423, bcdDevice= 0.01
usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tsc: Refined TSC clocksource calibration: 2195.881 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa6ffc1640, max_idle_ns: 440795239502 ns
clocksource: Switched to clocksource tsc
usb 2-1.2: new high-speed USB device number 4 using ehci-pci
usb 2-1.2: New USB device found, idVendor=04f2, idProduct=b52b, bcdDevice=95.52
usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-1.2: Product: USB2.0 VGA UVC WebCam
usb 2-1.2: Manufacturer: Chicony Electronics Co.,Ltd.
usb 2-1.2: SerialNumber: 0x0001
Freeing initrd memory: 116552K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
microcode: CPU0: patch_level=0x07030105
microcode: CPU1: patch_level=0x07030105
microcode: CPU2: patch_level=0x07030105
microcode: CPU3: patch_level=0x07030105
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (2111594999, 430198)->(2117470382, -5445185)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 506bbeb375a739f193260990a9361a99a99bed1c'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
blacklist: Loading compiled-in revocation X.509 certificates
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 506bbeb375a739f193260990a9361a99a99bed1c'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:438:306
tty tty35: hash matches
acpi_cpufreq: overriding BIOS provided _PSD data
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3232K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 1476K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.15.0-58-generic
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ahci 0000:00:11.0: version 3.0
cryptd: max_cpu_qlen set to 1000
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SBSM) (20210730/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.15.0-58-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
r8169 0000:02:00.0 eth0: RTL8106e, 34:97:f6:cb:27:e0, XID 449, IRQ 27
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI BIOS Error (bug): Could not resolve symbol [^^^PB2.VGA.AFN7], AE_NOT_FOUND (20210730/psargs-330)
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Initialized Local Variables for Method [_BCM]:
Local0: 00000000818a3ee1 Integer 000000000000639C
Local1: 0000000027decb08 Integer 0000000000000000
Local2: 0000000041a45a5b Integer 0000000000000000
Local3: 00000000fe0e86e0 Integer 00000000000000FF
Initialized Arguments for Method [_BCM]: (1 arguments defined for method invocation)
Arg0: 0000000084644178 Integer 0000000000000064
ACPI Error: Aborting method \_SB.PCI0.VGA.LCDD._BCM due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
ACPI: \_SB_.PCI0.VGA_.LCDD: _BCM evaluation failed
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.15.0-58-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:10.0
r8169 0000:02:00.0 enp2s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xfea6f000 port 0xfea6f100 irq 33
ata2: SATA max UDMA/133 abar m1024@0xfea6f000 port 0xfea6f180 irq 33
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new low-speed USB device number 2 using xhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVDRAM GUE1N, AS00, max UDMA/133
ata1.00: ATA-10: CT960BX500SSD1, M6CR022, max UDMA/133
ata1.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
ata1.00: Features: Dev-Sleep
psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381f00)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA CT960BX500SSD1 R022 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE1N AS00 PQ: 0 ANSI: 5
usb 3-1: New USB device found, idVendor=0461, idProduct=4e54, bcdDevice= 1.00
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Tiger USB Optical Mouse
usb 3-1: Manufacturer: PixArt
psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
sda: sda1 sda2 < sda5 > sda3
psmouse serio4: elantech: Elan sample query result 00, 23, 64
sd 0:0:0:0: [sda] Attached SCSI disk
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
asus_wmi: ASUS WMI generic driver loaded
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt Tiger USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:0461:4E54.0001/input/input14
hid-generic 0003:0461:4E54.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Tiger USB Optical Mouse] on usb-0000:00:10.0-1/input0
[drm] radeon kernel modesetting enabled.
Console: switching to colour dummy device 80x25
radeon 0000:00:01.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (MULLINS 0x1002:0x9851 0x1043:0x1360 0x45).
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: Asus
radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading mullins Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 13 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xC0731000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[drm] amdgpu kernel modesetting enabled.
amdgpu: CRAT table not found
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
raid6: sse2x4 gen() 6384 MB/s
raid6: sse2x4 xor() 2949 MB/s
raid6: sse2x2 gen() 6017 MB/s
raid6: sse2x2 xor() 3925 MB/s
raid6: sse2x1 gen() 4958 MB/s
raid6: sse2x1 xor() 3028 MB/s
raid6: using algorithm sse2x4 gen() 6384 MB/s
raid6: .... xor() 2949 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 249.11-0ubuntu3.6 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Finished Availability of block devices.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module chromeos_pstore...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Load Kernel Module pstore_blk...
systemd[1]: Starting Load Kernel Module pstore_zone...
systemd[1]: Starting Load Kernel Module ramoops...
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: [email protected]: Deactivated successfully.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@chromeos_pstore.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module chromeos_pstore.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module efi_pstore.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: modprobe@pstore_blk.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module pstore_blk.
systemd[1]: modprobe@pstore_zone.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module pstore_zone.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module ramoops.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Starting Create System Users...
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Condition check resulted in First Boot Complete being skipped.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Reached target Preparation for Local File Systems.
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Started Journal Service.
systemd-journald[372]: Received client request to flush runtime journal.
input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input15
ccp 0000:00:08.0: 4 command queues available
ccp 0000:00:08.0: ccp enabled
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
asus_wmi: Initialization: 0x1
asus_wmi: BIOS WMI version: 0.0
asus_wmi: SFUN value: 0x4a0077
asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
mc: Linux media interface: v0.10
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
videodev: Linux video capture interface: v2.00
ath: phy0: WB335 1-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
kvm: Nested Virtualization enabled
SVM: kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffa77501f00000, irq=38
usbcore: registered new interface driver ath3k
usb 2-1.2: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b52b)
input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input17
usbcore: registered new interface driver uvcvideo
Adding 3417084k swap on /dev/sda5. Priority:-2 extents:1 across:3417084k SSFS
ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input18
usb 2-1.1: USB disconnect, device number 3
snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC1D0: inputs:
snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input19
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input20
spl: loading out-of-tree module taints kernel.
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
usb 2-1.1: new full-speed USB device number 5 using ehci-pci
ZFS: Loaded module v2.1.4-0ubuntu0.1, ZFS pool version 5000, ZFS filesystem version 5
audit: type=1400 audit(1723598369.718:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=754 comm="apparmor_parser"
audit: type=1400 audit(1723598369.718:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=755 comm="apparmor_parser"
audit: type=1400 audit(1723598369.718:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=755 comm="apparmor_parser"
audit: type=1400 audit(1723598369.730:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=757 comm="apparmor_parser"
audit: type=1400 audit(1723598369.730:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=757 comm="apparmor_parser"
audit: type=1400 audit(1723598369.730:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=757 comm="apparmor_parser"
audit: type=1400 audit(1723598369.734:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=756 comm="apparmor_parser"
audit: type=1400 audit(1723598369.734:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=756 comm="apparmor_parser"
audit: type=1400 audit(1723598369.734:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=756 comm="apparmor_parser"
audit: type=1400 audit(1723598369.734:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=756 comm="apparmor_parser"
RTL8208 Fast Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
r8169 0000:02:00.0 enp2s0: Link is Down
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores/threads
vboxdrv: TSC mode is Invariant, tentative frequency 2195880990 Hz
vboxdrv: Successfully loaded version 7.0.2 r154219 (interface 0x00330003)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
wlp1s0: authenticate with a4:2a:95:3c:fc:f8
wlp1s0: send auth to a4:2a:95:3c:fc:f8 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with a4:2a:95:3c:fc:f8 (try 1/3)
wlp1s0: RX AssocResp from a4:2a:95:3c:fc:f8 (capab=0x411 status=0 aid=5)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 2-1.1: New USB device found, idVendor=13d3, idProduct=3423, bcdDevice= 0.02
usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
NET: Registered PF_ALG protocol family
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
kauditd_printk_skb: 15 callbacks suppressed
audit: type=1400 audit(1723598377.522:27): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1334 comm="cups-browsed" capability=23 capname="sys_nice"
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
hid-generic 0005:046D:B342.0002: unknown main item tag 0x0
input: Keyboard K380 Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.1/2-1.1:1.0/bluetooth/hci0/hci0:21/0005:046D:B342.0002/input/input21
hid-generic 0005:046D:B342.0002: input,hidraw1: BLUETOOTH HID v42.01 Keyboard [Keyboard K380] on 74:c6:3b:b9:92:f6
ntfs3: Max link count 4000
ntfs3: Enabled Linux POSIX ACLs support
ntfs3: Read-only LZX/Xpress compression included
ntfs3: Unknown parameter 'windows_names'
perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3151 > 3142), lowering kernel.perf_event_max_sample_rate to 63250
usb 3-1: USB disconnect, device number 2